Winix ZERO+ User Manual


English ZERO+ WiFi
This product comes with all of the required filters. The protective plastic wrap must be
removed from the filters before use.
ę
Operating the unit without removing the plastic wrap may result in product failure.
ę
Unplug and make sure the unit is turned off before installing filters.
ę
The unit will automatically power off when front panel is opened.
ŵ
Remove the front panel by grasping its
upper edge and gently pulling towards
yourself.
ˍ
To remove the front panel, the latch at
the lower edge of the panel must be
released from its position.
Latch
Ŷ
Remove the filters from the unit, they are
protected inside a plastic wrap.
ŷ
Remove filters from protective plastic wrap.
ˍ
Operating the unit without removing
filters from plastic may cause abnormal
noise, deformation, or fire as a result of
overheating.

Note
ˍ
Refer to pages 15 - 18for detailed information on filter care
and how to replace them.
INSTALLING THE FILTERS

Winix ZERO+ Specifications

General

Timer	Yes
Noise level	55 dB
Certification	CE, RoHS, WEEE
Air purify rate	- m³/h
Number of speeds	4
Suitable for room area up to	40 m²
Sustainability certificates	ENERGY STAR
Filtering capability	Cigarette smoke, Fine dust, Pollen
Number of filter stages	5
Product color	Grey, White
Built-in display	No
Power consumption (max)	90 W

Weight and Dimensions

Depth	245 mm
Width	415 mm
Height	600 mm
Weight	8500 g