Winix ZERO+ User Manual


English ZERO+ WiFi
WINIX SMART
8. Connecting to WINIX SMART
WINIX SMART allows you to conveniently control your air purifier from any location.
WINIX SMART is optimized for the following specifications. Depending on your smart
phone capabilities and service parameters, some functions may not be supported.

Note

ANDROID (ICS 4.12 Jellybean or later recommended)

iOS (6.0 or later recommended - iPhone 4S or later)
ę
Before connecting to Smart Home
ˍ
A Wi-Fi wireless router must be installed within range of the air purifier to use WINIX
SMART.
ˍ
Ensure Wi-Fi router matches the following specifications;
802.11b/g/n 2.4GHZ or for a dual-band wireless router (2.4GHz/5GHz), be sure to
select 2.4GHz.
ˍ
Be sure to have the Wi-Fi password handy.
ˍ
During registration, please keep the air purifier, wireless router, and smart device
within a 32ft. radius.
ˍ
Obstacles between the air purifier, wireless router, and smart device may cause weak
reception.
ˍ
Before connecting, users with a "Smart Network Switch" on their device should
temporarily disable it.
ˍ
Once WINIX SMART has been connected, the "Smart Network Switch" on your device
can be enabled.

Winix ZERO+ Specifications

General

Timer	Yes
Noise level	55 dB
Certification	CE, RoHS, WEEE
Air purify rate	- m³/h
Number of speeds	4
Suitable for room area up to	40 m²
Sustainability certificates	ENERGY STAR
Filtering capability	Cigarette smoke, Fine dust, Pollen
Number of filter stages	5
Product color	Grey, White
Built-in display	No
Power consumption (max)	90 W

Weight and Dimensions

Depth	245 mm
Width	415 mm
Height	600 mm
Weight	8500 g