SECTION 12 –
MISCELLANEOUS
12-8
To Operate Ceiling Ventilator
1. Turn the Dome Crank Knob to raise the dome
about 3" or more to allow the turbine fan to
operate. (A built-in safety switch will not let
the fan motor run unless the dome is partially
open).
2. The turbine fan will start automatically as the
vent dome is raised and stop as the vent dome
is lowered and closed. (Fan Power switch
must be ON and Fan Speed knob in a position
other than 0-Off).
3. Turn the Fan Speed knob to the desired level
(0-Off, 1-Low, 2-Med, 3-Hi).
4. Open a window or door to provide airflow.
Direction of airflow is determined by which
window or door is opened.
NOTE: For best results, close all other roof
vents, windows, and doors, then open
one (1) window the farthest distance
from the roof ventilator.The fan speed
selector on the fan allows you to adjust
the amount of circulation you need at any
time.
5. If you want the vent dome raised without the
fan running, turn Off either the Fan Power
switch or Fan Speed knob (0-Off ).
Further Information
See the power ventilator manufacturer’s
operating instructions supplied in your InfoCase
for further instructions, care, and cleaning
information.
SKYLIGHT VENT
The Skylight Vent features a sliding shade for
privacy and light control. It can also be opened to
several positions for ventilation.
To Open Skylight Vent
.
Power Roof Ventilator
Manual Dome
Crank Knob
Fan Speed
Selector
Fuse
NOTICE
Always close the skylight completely
before driving. Do not open the skylight
when the vehicle is in motion.
• Press button with thumb to release elevation bar
To Next Page
Loading...