Servicing and maintenance
English 37
7.1.2 Manual cleaning of the machine interior
Open the machine
door
Fold the lower
rinsing pipes
upward
Remove the lower
and upper wash
arms
Remove the filter
cassette and the
strainers
Clean the filter
cassette
Clean the strainers Clean the wash
arms
If the interior of the machine is dirty: Clean the interior with a sponge and a brush. If
necessary, spray it using a hose.
Clean the sieves from the pump suction openings using a brush. The sieves can be
removed if required.
Mount the filter
cassette and the
strainers
Mount the lower
and upper wash
arms
Fold the lower
rinsing pipes
downward
Close the machine
door
Press the on/off key (1) to switch on the machine
Press key 2 for approx 2 seconds and then release it
The water in the tank is pumped out and the machine then switches off
Close the local shut-off valve for the water supply
Switch off the local mains disconnector
7.1.3 Cleaning the exterior of the machine
Clean the external surfaces using a stainless steel cleaner and stainless steel support.
Open the machine door a little so that the interior can dry. This is important for long-term corrosion
protection even in case of stainless steel.
7.1.4 Checking the external water preparation
Check whether sufficient regenerating salt has been filled
To Next Page
Loading...
