Wissner-Bosserhoff Carisma - Backrest Function Operation; Electrical Function Fault Safety; Electromagnetic Radiation Interference Warning; Safety During Bed Movement

9
T 08 9351 7500 E info@unicarehealth.com.au W www.unicarehealth.com.au
8.1. Backrest Function (Br)
The adjustment is made via the corresponding buttons of the handset.
The BR moves towards the head end of the bed during the upward motion. This function
enables patients/residents to fi nd a comfortable position without the feeling of becoming
restricted in the upper body area.
The natural movement of the body is thus supported by this technology.
Caution! Do not operate under load. When operating the mechanical emergency lowering
of the backrest, (optional) this must always be fi xed to the mattress restricting bar or
lifting pole to avoid a sudden lowering.
Recommendation: Handling can be simplifi ed by having the patient/resident fi rmly hold
the lifting pole trapeze (if available) so that there is no load at all on the backrest.
Handling: Hold the BR in the set position and remove the load from it slightly. Turn the red
lever (on the side of the motor unit covering) in the direction of the backrest.
Handling: Hold the thigh rest in the set position and remove the load from it slightly. Turn
the red lever (on the side of the motor unit covering) in the direction of the thigh rest.
Caution! All electrical functions could have faults - unless you lock them and just release
them for the duration of the function.
Caution! Other devices that emit electromagnetic radiation (e.g. radio telephones) can
have an infl uence on electrical bed functions. For this reason in general it applies that bed
functions not required have to be locked for reasons of safety. The use of such devices in
the vicinity should be avoided as far as possible.
Caution! When moving the bed to different positions, it must be ensured that no persons,
body parts or objects are in the adjustment area or between the head / foot end and the
fl oor.
Caution! Since the system can be run via battery operation (optional), it is not enough just
to pull out the plug in case of the motors functioning incorrectly. If an incorrect function
occurs, please switch off functions via the control box and contact our Customer Service
(battery operation option).