What to do if the handset does not work on my Wissner-Bosserhoff sentida?
If the handset for your Wissner-Bosserhoff Medical Equipment isn't working, try these steps: First, unplug the power, wait three minutes, and plug it back in. Then, reset the handset. Also, ensure the handset isn't locked and check the plug connection. If it still fails, contact Wi-Bo customer service.
Why do the electric motor adjustments not function on my Wissner-Bosserhoff sentida Medical Equipment?
If the electric motor adjustments on your Wissner-Bosserhoff Medical Equipment aren't functioning, it could be due to several reasons. First, ensure the handset is properly plugged in or may be faulty; try unplugging the power, waiting three minutes, and plugging it back in, or reset the handset. If that doesn't work, check if the plug is correctly connected to the power supply and that the battery isn't empty. Finally, the system may have overloaded, causing the thermal fuse to disconnect; allow the system to cool down for up to 18 minutes. If problems persist, contact customer service.
What to do if the castors on my Wissner-Bosserhoff sentida Medical Equipment do not brake or roll?
If the castors on your Wissner-Bosserhoff Medical Equipment aren't braking or rolling, it may be due to foreign objects accumulated in the castors. Remove any foreign bodies. If the issue persists, the castor system may be defective, and you should contact customer service.
What to do if the SafeFree® side guard can no longer be correctly adjusted on my Wissner-Bosserhoff Medical Equipment?
If the SafeFree® side guard on your Wissner-Bosserhoff Medical Equipment can no longer be correctly adjusted, it might be because the mechanisms are blocked. Check the moving parts and remove any foreign bodies. If the mechanical parts are bent, contact customer service.
What to do if error message sounds during height adjustment on Wissner-Bosserhoff Medical Equipment?
If you hear an error message during height adjustment on your Wissner-Bosserhoff Medical Equipment and cannot adjust the height, comfort seating, or automatic prophylaxis, it indicates a motor operation fault. Contact our technical customer service for assistance.
How to fix underbed light if it is not working correctly on Wissner-Bosserhoff sentida?
If the underbed light on your Wissner-Bosserhoff Medical Equipment isn't working correctly, ensure that the correct standard is saved. Switch the underbed light into automatic mode when the resident is in bed.
Information on the structure and symbols within the manual, covering operation and safety notes.
Explanation of terms and symbols used for important notes like danger, attention, and caution.
Details on the bed's design, target group, application restrictions, and intended users.
Crucial safety information for the proper and safe use of the bed, including warnings and precautions.
Resources for additional assistance, including user videos and manual downloads.
List of abbreviations and their meanings used throughout the document.
Procedures for checking and receiving the delivered nursing home bed, including defect reporting.
Instructions on positioning the bed, ensuring floor suitability, and safety clearances.
Diagram and explanation of motor connections on the Duomat 9 unit for bed functions.
Information on the bed's optional battery system, maintenance, and disposal.
Manual procedure for lowering the backrest and thigh rest during power failure.
Explanation of how to use the handset for basic bed adjustments like backrest and height.
Details on extra features accessible via the handset, such as lighting and specific positions.
Information on switching modes, activation durations, and the 3-stop strategy for bed movement.
How to perform adjustments using the SD handset, including LED indicators and error displays.
Explanation of the comfort egress feature and the 3-stop strategy for safe bed adjustment.
How to use the small key to lock and unlock handset functions for resident safety.
Instructions for safely replacing the hook that holds the handset on the bed.
Specific instructions for moving and braking the Sentida 1 model, including castor engagement.
Instructions for moving and braking Sentida 3 and 4 models using brake bars.
Moving and braking procedures for various Sentida 5 series models using axle levers.
Moving and braking procedures for Sentida 6 series models with foot-activated brake bars.
How to manually adjust the height of the calf section using ratchets.
Details on the operation, extension, and adjustment of the divided SafeFree® side guard.
Information on the flexible and retrofit-able SafeFree® Flex side guard elements.
Instructions for raising and lowering continuous side guards with release buttons.
Instructions on how to lower and lift the 3/4 siderails using handles and buttons.
Guidelines on selecting and using compatible mattresses with the bed for safety and function.
Information on available lighting options, including reading lights and underbed lighting.
Details on the switchable underbed lighting for DUO 9 models, including function.
Accessories and systems like SafeLift to aid resident mobilization and orientation.
Instructions for attaching and using the patient lifting pole and grab handle.
Information on the standing aid for attachment to accessory holders for resident support.
Details on the MobiStick 2 bedside controller for resident mobilization and ease of use.
Accessories related to patient treatment, such as IV poles and drip glasses.
Guidelines for attaching and using the IV pole for infusions, including load limits.
Options for maintaining distance from walls using protective bumpers and spacers.
Information on different types of protective bumpers for the bed and their installation.
Details on telescopic wall spacers for different undercarriage options and lengths.
Information on the wall spacer bar for specific Sentida models and its assembly.
Options for extending the patient surface of the nursing bed for increased comfort.
Explanation of fixed and temporary patient surface extensions and entrapment risks.
Details on extension elements and protectors for calfrests and footboards to close gaps.
Systems and accessories like SafeSense® for enhanced resident protection and safety.
Information on the SafeSense® bed-exit monitoring system and its functions.
Details on the SafeSense® 3 system for continuous resident monitoring via sensor pads.
Various types of radio transmitters available for system control and communication.
Holders for fixation belts that can be attached to different parts of the bed.
Attachment to increase side guard protection by approximately 60 mm.
Instructions for attaching extensions to side guards for increased safety clearance.
Padding and nets for side guards to provide additional protection by reducing gaps.
Information on the side guard lock mechanism and its attachment with a wrench.
Additional protective elements like fall prevention mats and evacuation sheets.
Miscellaneous accessories not covered in other categories, such as batteries and trolleys.
Holders for various types of handsets, designed for different side guard configurations.
Holders for urine bag holders or similar accessories, attachable to side panels.
Instructions for installing and using the foldable linen holder for temporary storage.
Soft covers for the head and footboards for added comfort and protection.
Guidelines and recommendations for cleaning the nursing home bed surfaces.
Step-by-step process for cleaning and disinfecting the bed, including preparation and post-steps.
Procedures and agent requirements for effective disinfection, emphasizing pre-cleaning.
Specific care instructions for varnished real wood components, sensitive to moisture.
Recommended frequency for daily cleaning, cleaning at resident change, and complete cleaning.
How to clean padding made of imitation leather and fabric, including stain removal.
Procedures for visual inspection and functional testing of the bed by qualified persons.
Guidelines for performing electrical measurements on the bed according to IEC standards.
A checklist for inspections and tests according to IEC 62353-VDE 0751-1 for safety compliance.
Information on ordering and using original spare parts, emphasizing safety.
Common problems and their possible causes and remedies for the nursing home bed.
Environmental conditions and preparation for storing the nursing home bed to prevent damage.
Explanation of various safety and identification symbols used on the product and manual.
Description of the information found on the bed's nameplate, including technical and safety data.
General| Brand | Wissner-Bosserhoff |
|---|---|
| Model | sentida |
| Category | Medical Equipment |
| Language | English |
To Next Page
