105
ENGLISH
11.2 Moving and braking (sentida 3 und 4)
The sentida 3 model variant is equipped
with castor feet at the foot end. sentida 4 is
equipped with castor feet at the head and
foot end.
To brake the sentida 3, push the foot-end
brake bar down. To brake the sentida 4,
push both the head-end and foot-end brake
bar down.
11.3 Moving and braking (sentida 5, 5-le, 5-m, 5-xl, 5-xxl)
There is a covered axle with lockable castors beneath the head and foot end. On the inner side
of this undercarriage cover, there is a braking lever located at the left and right side of the bed.
With this lever, you can release or lock the castors for each axle.
1. Pull the brake lever up to release the brakes.
2. Press the brake lever down to brake the bed.
1 2
▪ To move the sentida 1, rst adjust it to the low position using
the handset.
▪ Then, press the arrow buttons of the handset simultaneously
to lower the castors to the oor.
You can now move the bed freely.
▪ To brake the bed, you have to raise it from the low position.
+
To Next Page
