Wissner-Bosserhoff sentida - Mode change, activation time and 3-stop

96
ENGLISH
When the height is being adjusted up or down, the bed stops in the comfort exit position. To
continue the movement, the corresponding adjustment button on the handset must be relea-
sed and then pressed again.
Comfort exit / 3-stop strategy
STOP
STOP
Activating care mode
Locking the handset
Changing modes
/
Press and hold the comfort position or prevention automatic button for at least 3 seconds.
+
Press and hold the backrest and height adjustment button simultaneously for at least 5 se-
conds until the LED briey lights up yellow and then permanently lights up green.
Activation times
- When moving the handset approx. 20 sec.
- Selection of a function approx. 16 sec.
- Activation of care mode approx. 2 min.
The activation time is the time in which an adjustment can be made after the
handset or a specic function has been activated.
6.3 Mode change, activation time and 3-stop