120
ENGLISH
14.4 Treatment
14.4.1 IV pole
The IV pole is only intended for attaching infusions. Do not attach infusion pumps here.
The maximum load for the IV pole is 8 kg. Each hook can be loaded with 2 kg.
max. 2 kg per hook
IV pole
Item Designation Art� no� Reference
1 IV pole, straight 50-0694 AI 01-010949
2 IV pole, 45° angled 50-0693 AI 01-010949
3 Drip glass for IV poles 50-0694 and 50-0693 01-006094 -
4 IV clip for lifting pole, powder-coated 50-0003 -
Variants
Drip glass
The holder for the IV pole is located at the head end of the patient surface frame.
If you want to attach an IV pole:
▪ Insert the IV pole into the holder from above.
▪ Turn the IV pole so that the bolt of the holder sleeve lies in one of the notches provided in
the lifting pole holder.
To Next Page
