EasyManua.ls Logo

Wissner-Bosserhoff sentida - Bed extensions and matching accessories; Patient surface extensions

Wissner-Bosserhoff sentida
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
124
ENGLISH
14.6 Bed extensions and matching accessories
14.6.1 Patient surface extensions
There are two options to extend the patient surface of the sentida low nursing bed. A perma-
nent (xed) patient surface extension installed by the manufacturer or an optional temporary
one�
Long-term (xed) extension for the patient surface
The sentida low nursing bed is available with a 10 cm or 20 cm patient surface extension. This
patient surface extension can also be implemented afterwards in the factory or by authorized
qualied personnel. To close the resulting foot-end gap, a corresponding protector needs to
be inserted. If you want to have the patient surface of your sentida low nursing bed extended,
please contact your service partner. You can nd the address at the end of these instructions
for use.
foldable
!
Danger!
If you fail to close the foot-end gap resulting from the patient surface extension with
a protector and extension padding, there is a danger of entrapment! This applies to
both the temporary and the permanent patient surface extension. As an alternative
to the extension padding, you can also use a longer mattress.

Table of Contents

Related product manuals