Wissner-Bosserhoff sentida - SafeFree Flex

109
ENGLISH
12.2 SafeFree
®
Flex
SafeFree
®
Flex is a supplement to the SafeFree
®
concept with exible and individually retrot-
table side guard elements.
To attach/remove elements (identical for all variants):
▪ Insert the element with the rails into the corresponding guides on the side beam of the top
frame.
▪ Tighten element with buttery screw on the attachment strap.
▪ To remove an element, loosen the buttery screw and pull the element upwards.
Variations
Full SafeFree
®
side guard�For opera-
tion see chapter 8.1.
Dummy with handrail for attachment
between patient surface and side
panel, including the handrail incl.
maintaining the appearance.
Dummy for attachment between pa-
tient surface and side panel.
Attention!
In order to prevent an imperceptible loosening of the thumbscrews, these must be
regularly checked for their tightness!