WisyCom MCR41 - ERROR LIST

rev.12
MCR41-MCR42 User Manual
20
ERROR LIST
When an error occurs, the receiver
A. shows a message on the display
and for some error types
B. increases the errors counter in the info menu
C. inserts the error type and code on the error list in the info menu
When the error is solved, the message on the display disappear, but the error information (code
and description) are available on the error list in the Info menu (only for some error, see the
below table).
NOTE
1
: When the receiver is reset the error information (code and error type on the list) are lost.
Errors
Message on display
(A)
Error type
(C)
Code
(C)
Low voltage level
Battery Low / Ext pwr Low
TX of RX1 Battery Low
TX1 Pwr Low
TX of RX2 Battery Low
TX2 Pwr Low
Rear panel error
BASE: Error
Device ID copy1 invalid, Memory recovered
MB mem copy 1
87
Device ID copy2 invalid
Memory recovered
MB mem copy 2
88
RX1 copy1 invalid
RX1 mem copy 1
89
RX1 copy2 invalid
RX1 mem copy 2
8A
RX2 copy1 invalid
RX2 mem copy 1
89
RX2 copy2 invalid
RX2 mem copy 2
8A
PLL unlocked
-
PLL unlocked
84
CH mem header
-
CH mem header
85
Param mem header
-
Param mem header
86