WiT WIT-601A - Rate;Time; Simple Rate

- 17 -
Rate/Time
 Move the cursor to corresponding input boxes of rate and time with the up or down key.
 Set rate.
 Set time.

Press .
Simple Rate

Move the cursor to VTBI input box with the up or down key, long press for 1 seconds. The VTBI value
would be displayed “OFF”.
 Set rate.
 Press .
Notes： 1. Choose simple infusion mode, should first move the cursor to VTBI input box with the up or down
key, long press for 1 seconds. The VTBI value would be displayed “OFF”. Press any numeric
key (0-9), “OFF” would disappear, exit the simple infusion mode.
2. Drop sensor plays a role in monitoring during simple infusion mode, it would prompt the alarm of
empty when detecting no liquid drips.