This document enables safe and efficient use of the Chrono-
Master/ChronoMaster Air precision measuring device (here-
after referred to as the “device” (applies to both models) or
“ChronoMaster Air”). The document is a component of the
device and must be kept near the device where it can be
accessed by personnel at all times.
This document is valid for ChronoMaster und ChronoMaster
Air. If the content is only valid for ChronoMaster Air, this is indi-
cated accordingly.
Personnel must have carefully read through and understood
this document before commencing work. The basic prerequi-
site for safe work is compliance with all the safety, warning
and process instructions specified in this document.
In addition, the local health and safety regulations and general
safety rules for the area in which the device is used apply.
Illustrations in this document help provide a basic under-
standing and may deviate from the actual design.
The content of this document is protected by copyright. Its use
is permitted within the context of device use. No other use is
permitted without the written approval of Witschi Electronic
AG.
Your point of sale can provide you with technical information.
You can find your nearest point of sale on our website at
http://www.witschi.com/de/firma/vertretungen
We are also always interested in hearing from you about your
experiences in using the device and any information that could
help us improve our products.
Address Witschi Electronic AG
Bahnhofstrasse 26
3294 Büren a.A.
Switzerland
Phone +41 32 352 05 00
Fax +41 32 351 32 92
E-mail service@witschi.com
Internet www.witschi.com
About this document
Copyright
Customer Service
Customer Service information
24.03.2021 Precision measuring device ChronoMaster / ChronoMaster Air 3
To Next Page
Loading...
Need help?
General
