1 Product description
1.1 Overview
Fig. 1: ChronoMaster Air
No. Description
1 Pivoting microphone for measurement of the watch noises
2 Signal sensor for recording and transmission of the watch noises
•
Ä
Chapter 4.2 “Positioning the watch and starting a measurement automatically”
on page 29
3 Clamping jaw made of neoprene for clamping the watch or the watch movement
•
Ä
Chapter 4.2 “Positioning the watch and starting a measurement automatically”
on page 29
4 USB cable for connecting the device to the PC or tablet computer
•
Ä
Chapter 3.4 “Connecting the device” on page 24
5 Switching screw for setting the device for right-handers or left-handers
6 Control keys for frequently used functions: selecting the previous program or the next pro-
gram, restart and start/stop
•
Ä
Chapter 4.3 “Controlling the measurement using control keys” on page 33
7 USB-C port (ChronoMaster Air only)
8 ON/OFF slide switch (on bottom) (ChronoMaster Air only)
•
Ä
Chapter 1.5 “Slide switch (ChronoMaster Air only)” on page 11
24.03.2021Precision measuring device ChronoMaster / ChronoMaster Air6
To Next Page
Loading...
