1.2 Scope of delivery
The scope of delivery includes the ChronoMaster and a USB
flash drive with the following contents:
• “Chronoscope Service” display software
• Software manual in German, French, English, Spanish and
Italian as PDF files
Information on the display software
Further information on the display software can
be found in
Ä
Chapter 1.3 “Software”
on page 9 and
Ä
Chapter 3.3 “Installing the
software” on page 22, and in the corre-
sponding software manual.
The scope of delivery also includes:
• This document
• Calibration certificate
• Warranty information
• Dust cover
• 4 × Eneloop AAA rechargeable batteries with charger (Chro-
noMaster Air only)
• USB-C cable (1 m) and charger (ChronoMaster Air only)
1.3 Software
The measurements are controlled using the “Chronoscope
Service” display software. It is provided on the supplied USB
flash drive.
Information on the display software
Information on installation and operation of the
display software is to be found in
Ä
Chapter 3.3
“Installing the software” on page 22 and in
the corresponding software manual.
1.4 Modes
The device provides various measuring modes that can be set
in accordance with the escapement type of the watch to be
tested.
Measuring modes
24.03.2021 Precision measuring device ChronoMaster / ChronoMaster Air 9
To Next Page
Loading...
Need help?
General
