Wittkopp SmartCam - Changing User Code K1; Deleting User Code K1; Changing Master;Admin Code K1

7
SmartCam
5.4 Changing a user code K1
 
1.
Press and hold the key “0“ for approx. 3 seconds.
When releasing the key the green LED lights up permanently.
0
2. Enter your old 4-/6-digit user code e.g.
1313
/
13
3. Enter your new 4-/6-digit user code e.g.
3333
/
33
4. R-enter your new 4-/6-digit user code e.g.
3333
/
33
5. The new user code is accepted.
5.5 Deleting a user code K1
Deleting a user code is only possible when the lock is closed.
 
1.
Press and hold the key “3“ for approx. 3 seconds.
When releasing the key the green LED lights up permanently.
3
2.
Enter your 6-digit administrator code e.g.
654321
3.
Enter the user PIN of the user who has to be deleted e.g. user 3.
3
4. The user code is deleted.
5.6 Changing the master code/administrator code K1
Changing the master code/administrator code is only possible when the lock is opened.
 
1.
Press and hold the key “2“ for approx. 3 seconds.
When releasing the key the green LED lights up permanently.
2
2. Enter your 6-digit code e.g. administrator code.
654321
3. Enter your new 6-digit code e.g.
888888
4. Re-enter your new 6-digit code e.g.
888888
5. The new code is accepted.