WMF 1000 PRO - Start-up complete; Switching on and off; About the timer: Switching on and off

11
Start‑up program
Start-up program
> Press the Off/C button
The start-up program begins.
Press the
> + button to set the desired language.
Confirm with the P button.
>
The machine is switched on, the start-up program leads you through the basic settings.
Basic settings
Press the > - and + buttons to set the desired values
Press the P button to confirm the values and inputs
>
After confirmation, the program jumps to the next point of the settings.
When exiting the program, the new values are saved.
Time
Set the current time here.
>
hh= hour (two places)
mm= minutes (two places)
ss= seconds (two places)
Date
Set the current date here.
>
dd= day (two places)
mm= month (two places)
yyyy= year (four places)
language: english
OK: P change: -/+
initial setup
of your WMF 1000
The set values can be changed in
the “Basic Settings” program after
start-up.
See
“Settings” chapter
time hh:mm:ss
OK: P change: -/+
Cup preheating
P
Select/confirm
Care button
–
Page backwards
Reduce value
+
Page forwards
Increase value
The new values are saved when you exit
the program.
date dd:mm:yyyy
OK: P change: -/+