Warm-up rinse/Coffee system rinse
The coffee system rinse is automatically performed when the machine is switched on or off.
A warm‑up rinse can be called up on demand.
Place an appropriate container under the All‑in‑One professional spout
>
Issue the request with the P button >
Start the rinse with the care button >
The pipes of the coffee machine are rinsed with hot water.
Hot rinse water is emptied through the All-in-One professional spout.
After the rinse, the readiness state display appears.
WMF Connect and Clean milk system rinse
The WMF Connect and Clean milk system rinse is unique world‑wide; it allows you to easily maintain
perfectly clean systems for beverages with milk components and thus maintain consistently enjoyable
coffee.
Select the displayed program with the P button
>
The display reports the individual activities that must be done before the rinse.
Place an appropriate container under the All‑in‑One professional spout
Wipe off the outside of the milk hose with a clean, damp cloth
>
Place the milk hose with the milk nozzle on the hot water spout and turn it clockwise to the stop >
Start the rinse with the care button >
warm up rinsing
OK:P brwse.:care-bt
your selection pls
08:15 17.10.2007
Milk system rinse time
approx. 30 seconds
Place the milk hose on the
hot water spout and turn it
clockwise to the stop
milk system rinsing
OK:P brwse.:care-bt
connect hose
start: care button
To Next Page
Loading...
