If necessary the new setting can be tested by a dispensing test >
The taste and the composition of the beverage remains the same, only the volume is changed to your
wishes and to match the cup size.
As soon as the cup volume is set as desired, confirm the new value with the P button
>
Beverage settings
Here you can adjust the recipes of your coffee specialties according to your personal tastes.
The following settings are available:
Water volume •
Coffee strength •
Amount of foam volume* •
Milk volume* •
Sequence of dispensing of milk and coffee* •
Pre‑brew (aroma development) •
* Option only available for beverages with milk
Briefly press the P button
>
Use the > + button to browse through to
Select the beverage setting program by pressing the P button
>
Select the beverage for which the taste and composition should be changed >
cup volume: 100%
OK: P Test:bev.btn.
select program
browse: +
Cup preheating
P
Select/confirm
Care button
–
Page backwards
Reduce value
+
Page forwards
Increase value
The new values are saved when you exit
the program.
beverage settings
OK: P change: -/+
To Next Page
Loading...
