WMF 1000 PRO - Switching the coffee machine on and off

21
Operation
Switching the coffee machine on and off
Switching on
> Press the Off/C button
The welcome display appears, then the coffee machine heats up.
Place a container for the rinse water (approx. 120 ml) under the All‑in‑One professional spout
>
After the machine is heated up, there is a coffee system rinse. This rinse warms up all the pipes.
The coffee system rinse lasts approx. 40 seconds; after this, the machine is ready to operate.
The readiness state display appears.
Switching off
> Press the Off/C button for approx. 2 seconds
Place a container for the rinse water (approx. 120 ml) under the All‑in‑One professional spout
>
If beverages with milk (such as café latte) were prepared, then you will be asked to perform a milk
system rinse.
A coffee system rinse begins after that. Follow the display messages.
The machine switches off.
WELCOME
of your WMF 1000
Time from switching on until readiness
state approx. 4 min.
heating up...
your selection pls
08:15 17.10.2007
Milk system rinse
See
“Care” chapter
> “Care programs”