Bean hopper is empty
refill beans
confirm beverage
There are not enough coffee beans in the
coffee bean hopper
Grinding is interrupted
Pour coffee beans into the bean hopper
>
Press the beverage button again >
The grinding process continues and the
additional coffee required for the brewing
cycle is ground The selected beverage is then
brewed.
Insert coffee grounds
insert coff. grounds
select beverage
The manual insert lid is open
Insert the ground coffee
>
Close the manual insert >
Select the desired beverage with the >
beverage button
This procedure can be cancelled with the Off/C
button. Already-inserted ground coffee is
removed via the coffee grounds container.
Change filter
your selection pls
replace water filter
The water filter must be changed
Change filter (see “Care” chapter)
>
To Next Page
Loading...
