Replace the filter cartridge >
>
Insert the milk foamer
Fill up the water tank and replace it
>
The machine now heats up. Steam and condensed water will escape during this process.
The water hardness, the water flow and whether a tank filter is used determine the
schedule for descaling. The time will be calculated by the WMF 1000 pro and the
descaling request will appear.
Descaling can be delayed by pressing the Off/C button, however it must be carried out
within the next 50 brew cycles. Otherwise, beverage dispensing will be blocked. The
blocking will be cleared after a descaling.
d e s c alin g ...
time remaining: 1 min.
See Call care programs without request
Immediately after decalcification, you will
be prompted to clean the machine.
See
Cleaning the Machine - Cleaning Program
starting on page 34.
To Next Page
Loading...
