EasyManua.ls Logo

WMF 1000 PRO - Hazard instructions

WMF 1000 PRO
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
56
Messages and Tips
Grease O-rings
Use only WMF gasket grease. The grease is specially matched to the material and safe for food
preparation equipment.
O‑ring for water tank
Spout support
If the water tank is difficult to remove and replace.
Lightly smear O‑rings on water spout supports with WMF
>
gasket grease
O‑rings in brewer If the brewer is difficult to remove and replace.
If the O-rings are very dry.
Lightly smear O‑rings on the brewer with WMF gasket grease
>
O‑ring for steam nozzle If the milk foamer is difficult to assemble or disassemble.
Lightly smear the O‑ring on the steam nozzle with WMF
>
gasket grease
Clean steam nozzle
Clean the steam nozzle in
the All‑in‑One professional
spout.
If no milk foam is still produced even after a milk system rinse.
Disassemble the milk foamer
>
Clean the steam nozzle carefully with one of the small cleaning >
brushes provided

Table of Contents

Related product manuals