WMF 1200 S - Page 40

40
User Manual WMF1200 S
Settings | Set grinding degree
Test the new grinding degree setting
 Place acup of the appropriate size beneath the
combi spout
 Briefly touch
Two new brewing tests start automatically, one after
the other.
The brewing pressure is shown in the form of abar
diagram during the second brewing test.
• low brewing pressure gcoarse grinding degree
• high brewing pressure gfine grinding degree
After afew seconds, the grinding degree setting is
shown in the display.
 Touch
to end grinding degree setting
Grinding degree too fine
 Turn the multitool counter-clockwise to set the
grinding degree coarser
 Test the new grinding degree setting (see above)
 Touch to end grinding degree setting
Bar diagram display
w page 38
Set grinding degree
w page 52
Set coffee strength
w page 36
grinding too ne
test: P end: C
DI_04_03_07