WMF 1200 S - Bean Hopper Is Empty; Insert Ground Coffee; Clean the Coffee Machine; Change Filter

80
User Manual WMF1200 S
Messages and instructions | Operating messages
10.1.5 Bean hopper is empty
rell beans
right
DI_09_01_07
There are not enough coffee beans in the
bean hopper
Grinding is interrupted.
 Pour coffee beans into the bean hopper
 Press the beverage button again
The grinding process continues and the
additional coffee required for the brewing
cycle is ground. The selected beverage is then
brewed.
rell beans
left
DI_09_01_08
10.1.6 Insert ground coffee
insert ground coffee
select beverage
DI_09_01_09
The manual insert lid is open
 Insert ground coffee
 Close the manual insert
 Select the desired beverage with the
beverage button
Touch
to cancel the process. Ground coffee
that has already been inserted is removed via
the grounds container.
10.1.7 Clean the coffee machine
machine cleaning
OK: care pad
DI_09_01_10
The coffee machine must be cleaned
Only the care pad is lit up.
 Perform amachine cleaning
w Cleaning instructions w Machine cleaning
10.1.8 Change filter
your selection pls
replace water lter
DI_09_01_11
The water filter must be changed
 Change filter
w Care w Filter change, page 69
10.1.9 Descale coffee machine
your selection pls
descale machine
DI_09_01_12
The coffee machine must be descaled
 Perform adescaling
w Care w Descaling, page 69