WMF 1200 S - Water Filter; Water Hardness; Audio Signal; SB Mode (Self-Service Mode)

47
User Manual WMF1200 S
Settings | Basic settings
5.4.13 Water filter
Indicates whether awater filter is in use.
(recommended for water hardness of 5°dKH
andabove)
 Confirm the desired setting with
5.4.14 Water hardness
The hardness of the drinking water being used.
Enter the result of the carbonate hardness test here.
 Confirm the desired setting with
5.4.15 Audio signal
 Confirm the desired setting with
5.4.16 SB mode (self-service mode)
When set to yes , the functional pads are not
displayed.
Recommended for self-service.
 Confirm the desired setting with
The functional pads are displayed again by touching
and holding (at least 3seconds) the unilluminated
Ppad .
water lter: no
OK: P change: -/+
DI_04_04_17
Insert water filter
page w 16
water hardn.: 20
OK: P change: -/+
DI_04_04_18
Carbonate hardness test
w Accessories included
audio signal: on
OK: P change: -/+
DI_04_04_19
SB mode: no
OK: P change: -/+
DI_04_04_20
w PIN entry and PIN protection
page 49