WMF 1200 S - Clean the Water Tank (Optional)

63
User Manual WMF1200 S
Care
Mixer bowl is released from the retaining catch.
The propeller for the mixer is now visible.
 The propeller can be cleaned with acloth
 Dismantle two-piece mixer bowl
 Clean both parts of mixer bowl and mixer hose
under warm running drinking water
 Allow all parts to dry completely
 Re-assemble all parts
On re-assembly, all openings must face in the same
direction.
 Replace mixer bowl
 Turn stud on bayonet connector back clockwise
 Push mixer hose onto mixer bowl fitting again, and
plug in combi spout
 Replace milk lid
Scalding hazard
• If the mixer hose is not firmly attached,
hot water or hot powder beverage can be
discharged inadvertently
> Always firmly attach the mixer hose.
7.5.2 Clean the water tank (optional)
Thoroughly rinse water tank weekly with clear drinking
water.
Ensure that the spiral guide is seated
and the hose is not pinched.
CAUTION
Follow the Safety chapter
w starting on page 6