WMF 9000F VB - Operating Options Configuration

40
User Manual WMF9000 F VB
Software | Operating options
4.6 Operating options
Operating elements
Some functions can be switched to inactive in the
“Ready to operate” display for operation. These
functions and their pads are not displayed in the
inactive state.
SB mode (self-service)
For self-service mode, functions can be switched to be
inactive. These inactive pads and their functions are
not shown in self-service mode.
Options: • active
• inactive
Default value:
inactive
If self-service mode is activated, the following settings
are made at the same time.
• Menu pad: delayed
• Error message: symbol
• Cancel beverage: inactive
Menu pad
Options: • active
• inactive
Default value:
active
active The menu pad reacts immediately when the
pad is touched.
inactive Touching the empty pad twice calls up the
main menu.
DI_bedien
Operating elements
DS_04_06_01