WMF 9000F VB - Logo

43
User Manual WMF9000 F VB
Software | Operating options
Logo
Manufacturer's logo
Options: • active
• inactive
Default value:
active
active The manufacturer's logo is shown at the top
right of the “Ready to operate” display.
Customer’s logo
Options: • active
• inactive
Default value:
inactive
active When the option is set to “active” and
acustomer’s logo has been downloaded, the
customer’s logo is shown at the center of the
header bar when “Ready to operate”. When
the vending devices are connected it shows
the customer’s logo. In this case, both logos
cannot be displayed.
Load customer logo
Insert the USB stick containing the customer’s logo.
Load customer’s logo.
Size of customer’s logo
The logo must not be greater than 80pixels high.
Larger logos will be scaled to this size automatically.
Logo
DS_04_06_04