•
Make sure your appliance is not
touched or loaded during weigh
-
ing or calibration. The work sur-
face around the appliance must
be clear. The mains cable must
not be stretched or pinched
between the work surface and
the underside of the appliance.
•
The four feet of the appliance
must be on a horizontal work
surface and the appliance must
be stable during weighing.
•
If you need to move your appli-
ance for use or storage, do not
push it across the work sur
-
face. Lift it up and position it in
the right place without letting it
bump.
•
Observe, and do not exceed, the
maximum permitted weight. Your
WMF Avantgarde is intended for
weighing foodstuffs only.
2.6| CUSTOMER SERVICE
•
For your safety, do not use any
accessories or replacement parts
other than those provided by
authorized customer service
centers.
•
All work other than cleaning or
routine maintenance should be
performed by an authorized cus
-
tomer service center.
•
See also Table What to do if your
appliance is not working in Sec
-
tion 7.2.
36
To Next Page
Loading...
