SAFETY
Keep Egder And Area Around Clean
2
2-3 EGdoc082610 Safety
Keep Egder And Area Around Clean
DANGER! Maintain a clean and clear path for all necessary movement
around the Egder and lumber stacking areas. Failure to do so will
result in serious injury.
Dispose Of Sawing By-Products Properly
IMPORTANT! Always properly dispose of all sawing by-products,
including sawdust and other debris.
Check Edger Before Operation
DANGER! Make sure all guards and covers are in place and secured
before operating the Egder. Failure to do so may result in serious
injury.
WARNING! Always shut off the motor to stop the blade whenever the
Edger is not in use. Failure to do so may result in serious injury.
WARNING! Do not for any reason adjust the motor drive belts with the
motor running. Doing so may result in serious injury.
WARNING! Always ensure that there is a sharp point on the
anti-kickback fingers before each use of the Edger.
Be sure anti-kickback fingers are free from obstruction and are in a
downward position with lever released. Failure to do so may result in
serious injury.
Keep Persons Away
DANGER! Keep all persons out of the path of moving equipment and
boards when operating the Edger. Failure to do so will result in serious
injury.
!
To Next Page
Loading...
