SAFETY
Keep Hands Away
Safety EGdoc082610 2-4
2
Keep Hands Away
DANGER! Motor components can become very hot during operation.
Avoid contact with any part of a hot motor. Contact with hot motor
components can cause serious burns. Therefore, never touch or
perform service functions on a hot motor. Allow the motor to cool
sufficiently before beginning any service function.
DANGER! Moving Parts Can Crush and Cut. Keep hands clear. Make
sure all guards and covers are in place and secured before operating
or towing. Failure to do so may result in serious injury.
DANGER! Always be aware of and take proper protective measures
against rotating shafts, pulleys, fans, etc. Always stay a safe distance
from rotating members and make sure that loose clothing or long hair
does not engage rotating members resulting in possible injury.
WARNING! Coastdown Required. Always shut off the motor and allow
all moving parts to come to a complete stop before removing any
guards or covers. Do NOT operate with any guards or covers removed.
WARNING! Kickback Hazard. Stay clear of area during operation.
Follow all anti-kickback service and safety rules. Failure to do so may
result in serious injury
DANGER! Before changing the blades or performing any service to the
machine, disconnect the power cord from the electric box.
IMPORTANT! The blade housing and drive assembly covers are
equipped with safety key switches. As soon as you open the cover, the
motor will get turned off and all moving parts will stop spinnig. The
safety switches should always be in proper working condition.
IMPORTANT! The cutting width system is equipped with safety switch.
When you feed a board into edger, the cutting width setting is blocked.
To Next Page
Loading...
