SAFETY
Keep Safety Labels In Good Condition
Safety EGdoc082610 2-6
2
Keep Safety Labels In Good Condition
IMPORTANT! Always be sure that all safety decals are clean and
readable. Replace all damaged safety decals to prevent personal
injury or damage to the equipment. Contact your local distributor, or
call your Customer Service Representative to order more decals.
IMPORTANT! If replacing a component which has a safety decal
affixed to it, make sure the new component also has the safety decal
affixed.
Fire-Fighting
CAUTION! The edger’s work-stand should be equipped with a 4 kg or
bigger dry powder extinguisher.
Safety Labels Description
See Table 2-1. See table below for safety labels description.
TABELA 2-1
Decals View Decal No. Description
099220 Close guards prior to operating the
machine
096316 Electric box opening is possible with the
switch in “0” position only.
!
099220
To Next Page
Loading...
