SAWMILL ASSEMBLY
Unpacking the Sawmill
2
2-9 15doc091818 SAWMILL ASSEMBLY
2.2 Unpacking the Sawmill
1. Cut the bands holding the components together.
2. Remove the parts arranged inside the bed section.
3. Using a forklift truck or a winch with lifting capacity of minimum 500 kg, carefully lift the
saw head and set it aside. Then attach the winch hook to the bracket on the saw head.
WARNING! When removing the saw head, use extreme
care and keep all persons at a safe distance. Failure to do
so may result in serious injury or death.
FIG. 2-1
To Next Page
Loading...
