Wood-mizer LT15 Series - Log Loading Ramp (Option)

SAWMILL ASSEMBLY
Log Loading Ramp (Option)
SAWMILL ASSEMBLY 15doc091818 2-26
2
2.8 Log Loading Ramp (Option)
To install log loading ramp, mount ramp bracket (1) to the bed frame section tube using two bolts
(2), four washers (3) and two nuts (4) in place shown below. Insert ramp assembly (5) into ramp
bracket.
1
See Figure 2-19. .
1. See Parts List for detailed information about part numbers and mounting hardware dimensions.
RYS. 2-19
1
2
3
3
4
150232a
5