Wood-mizer LT40 B1 Series - Cutting Capacity

Safety & General Information
Cutting Capacity
Safety & General Information doc092820 1-11
1
should determine which blade you choose for optimum performance.
See The Blade Handbook for blade hook angle, tooth height, and tooth set specifications.
1.7 Cutting Capacity
See Table 1-4. The log size capacities of the LT40 B1-4 series sawmill are listed below.
Softwood
1
1
L
T40 Sawmill is equipped with a blade with a length of 4.01 m.
Medium
Hardwood
Frozen Timber or
Dense Hardwood
5-15HP Gas B275IH1030
B275IH741030
B375IH929
B375IH929
2
2
TRU•SHARP™ “F” blades use a 9/29 profile (9° hook angle and 29° back angle) and are designed
to cut frozen and/or extremely dense, hard-to-cut wood. Standard TRU•SHARP™ blades use a 10/30
profile.
7.4-11kW (10-15HP) Electric
16-25HP Gas
33HP Diesel
B376IH1030
B376IH741030
B275IH1030
B275IH741030
B376IH1030
B376IH741030
3
3
Customer may choose preferred blade.
LT40 Wide Sawmill is equipped with a blade with a length of 4.33 m.
B375IH929
2
15-18.5kW (20-25HP) Electric
42HP Diesel
B376IH1030
B376IH741030
B275IH1030
B275IH741030
B376IH1030
B376IH741030
3
B375IH929
2
TABLE 1-3
Max.
Diameter
1
1
Maximum log capacity for a basic mill is 2000 Kg.
Max.
Length
1
LT40B1E20H 36” (91,5 cm) 3.1 m
LT40B1E20H with debarker 36” (91,5 cm) 2.8 m
LT40B2E20H 36” (91,5 cm) 5.1 m
LT40B2E20H with debarker 36” (91,5 cm) 4.8 m
LT40B3E20H 36” (91,5 cm) 7.1 m
LT40B3E20H with debarker 36” (91,5 cm) 6.8 m
LT40B4E20H 36” (91,5 cm) 9.1 m
LT40B4E20H with debarker 36” (91,5 cm) 8.8 m
TABLE 1-4