Wood-mizer MP180 E6S - Long-Term Storage

MAINTENANCE
Long-Term Storage
MAINTENANCE doc052521 4-5
4
4.4.4 Table chain tension adjustment
Loosen two tension roller mounting bolts (A). Use the adjustment bolt B to adjust the table chain
tension.
4.5 Long-Term Storage
If the machine is not used for a long period of time, do as follows:
 Disconnect the power cord.
 Perform all routine actions described above.
 Remove the knives with mounting strips or clamping wedges and store them well lubricated in
above zero temperature.
 Loosen the motor belt tension.
 Spray a thin layer of anti-rust coating (such as P.D.R.P) onto the places not protected against
rusting.
 Store the machine in a well ventilated room.
 Cover the Multi-Planer.
FIG. 4-4
A(2)
B