Wood-mizer MP180 E6S - Page 8

INTRODUCTION
Machine Description
1
1-4 doc052521 INTRODUCTION
ANCHORING
For the highest safety, the Multi-Planer must be anchored to the floor with 8-10 mm diameter anchor
bolts.
TOOLS REQUIRED TO USE THE MULTI-PLANER:
 Allen wrench 4 mm (supplied)
 Allen wrench 5 mm
 Allen wrench 6 mm
 Flat wrench 10 mm (supplied)
 Wrench 10 mm
 Box wrench 13 mm
 Flat wrench 30 mm (supplied, for cutter)
 Adjustable wrench 8” or 10” (cutter)
 Slide caliper
 Measuring tape or ruler
 Paraffin oil for grindstone
SPACER RINGS THAT ARE SUPPLIED:
 3 x 40 mm height (per cutter)
 2 x 20 mm height (per cutter)
 2 x 10 mm height (per cutter)
 1 x 5 mm height (per cutter)
 1 x 2 mm height (per cutter)
 1 x 1 mm height (per cutter)
 1 x 0.5 mm height (per cutter)
 1 x 0.3 mm height (per cutter)
 1 x 0.2 mm height (per cutter)