Manual 37942A DTSC-200A - ATS Controller - Application
Page 6/21 © Woodward
Chapter 2.
Application Modes
Basic Applications
≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡
Application Mode: Util-Gen
This application mode has the following characteristics:
• The ATS controller monitors a mains sources and a generator source and transfers the load to the
generator source in case the mains source fails
• The ATS controller operates as Master controller
Figure 2-1: Application mode - Util-Gen
To Next Page
Loading...
