Product data for energy consumption
Comfort+ II RF – 6720892636 (2019/04)
20
10 Product data for energy consumption
The product data specified comply with the requirements of
EU Regulation No. 811/2013 as a supplement to ErP Directive
2017/1369/EU. The class of the temperature controller is
required to calculate the central heating energy efficiency of an
integrated system and is for this reason incorporated into the
system data sheet.
Table 22 Product data for the energy efficiency of the user
interface
Delivery condition
Adjustable
1) Classification of the user interface according to EU
Regulation 811/2013 for the identification of integrated
systems
2) Contribution to seasonal energy efficiency of central
heating in %
11 Simplified EU Declaration of Conformity
regarding radio equipment
Bosch Thermotechnik GmbH hereby declares, that the
Comfort+ II RF product described in these instructions
complies with the Directive 2014/53/EU.
The complete text of the EU Declaration of Conformity is
available on the Internet: worcester-bosch.co.uk.
12 Specifications
Table 23 Wireless technology in Comfort+ II RF and Key
13 Environmental protection/disposal
Used electrical and electronic appliances
Electrical or electronic devices that are no longer
serviceable must be collected separately and sent
for environmentally compatible recycling (in
accordance with the European Waste Electrical
and Electronic Equipment Directive).
To dispose of old electrical or electronic devices, you should
use the return and collection systems put in place in the country
concerned.
Batteries must not be disposed together with your household
waste. Used batteries must be disposed of in local collection
systems.
Function of control unit Class
1)
[%]
1),2)
Comfort+ II RF & Key
Room temperature-
dependent, modulating
V 3.0
Comfort+ II RF & Key &
Outside Temperature Sensor
(accessories)
Weather-compensated VI 4.0
Transmission protocol (wireless) X3D-C
Transmission frequency 868.00 MHz
Band width frequency 868.7 – 869.2 MHz
Maximum transmitting capacity 10 mW
Installation height -5 – 1800
Atmospheric pressure 780 – 10505
Operating temperature 0 – 60 °C
Storage temperature -20 – 85 °C
Relative humidity 23 °C 0 – 80%
Relative humidity 40 °C 0 – 93%
IP rating IP20, IPX4D
according to
DIN 40050
Category of receiver 2
Vibration EN ISO 1335
ASTM 4728
Batteries required AAA/AA
Battery service life 2 years
Temperature for the ball
pressure test
75 °C
Pollution degree 2
To Next Page
Loading...
Need help?
General
