Worcester Comfort+ II RF User Manual

Settings in the main menu
11
Comfort+ II RF – 6720892636 (2019/04)
5.5 Setting the temperature
▶ Select "hot water" symbol in main menu.
▶ Press the selector.
▶ Turn the selector to select Temperature.
▶ Press the selector.
▶ Turn selector to set the temperature.
▶ Press the selector.
Temperature is set.
5.6 Holiday
▶ Select the “Holiday” symbol in the main menu.
▶ Press the selector.
Holiday prog. is displayed.
▶ Press the selector.
▶ Off flashes.
▶ Select On.
▶ Press the selector.
The start and end date of the holiday are displayed.
The day of the start date flashes.
▶ Turn the selector if necessary to set the day.
▶ Press the selector.
The month of the start date flashes.
▶ Turn the selector if necessary to set the month.
▶ Press the selector.
The day of the end date flashes.
▶ Set end date (day/month).
After the month display for the end date has been set, the
menu closes.
If the holiday program has been set, this becomes active at
midnight on the first day that has been set and inactive at
midnight on the last day that has been set.
The heating and DHW heating are switched off while the holiday
program is active. These revert to normal operation at the end
of the holiday. The frost protection symbol is displayed to
indicate that the heat source is off but is switched on at
temperatures below 5 °C to provide protection against freezing.
Cancel the holiday program:
▶ Select the “Holiday” symbol in the main menu.
▶ Press the selector.
Holiday prog. and On is displayed.
▶ Press the selector.
On flashes.
▶ Turn the selector to select Off.
▶ Press the selector.
▶ Press the key to return to the standard display.
5.7 Information
▶ Select the “Info” symbol in the main menu.
The following menu items are available in the “Info” menu:
• System Pressure
• Outdoor temp.
• DHW
• Signal strength
• Energy Consumption
▶ Turn selector to select menu item.
▶ Press the selector.
System Pressure
▶ Turn selector to display pressure in heating circuit.
▶ Press the key to return to the standard display.
Outdoor temp.
If an outside temperature sensor (accessories) is installed, the
current outside temperature is displayed.
DHW
▶ Turn selector to display the current hot water temperature.
▶ Press the key to return to the standard display.
Signal strength
The signal strength is displayed as a number from 0 to 10.
Do not display the signal strength for too long as this quickly
depletes the batteries.
0 = No reception
1 – 3 = Poor reception
4 – 6 = Good reception
7 – 10 = Very good reception

Worcester Comfort+ II RF Specifications

General

Display	LCD
Temperature control range	5°C to 30°C
Power supply	2 x AA batteries
Mounting	Wall-mounted
Control Type	Programmable
Compatibility	Worcester Bosch boilers
Type	Wireless Programmable Thermostat
Communication	Radio Frequency (RF)
Features	Frost protection, Holiday mode
Range	Up to 30 meters