Explanation of symbols and safety instructions
3
Comfort+ II RF – 6720892636 (2019/04)
1 Explanation of symbols and safety
instructions
1.1 Explanation of symbols
Warnings
In warnings, signal words at the beginning of a warning are used
to indicate the type and seriousness of the ensuing risk if
measures for minimising danger are not taken.
The following signal words are defined and can be used in this
document:
DANGER:
DANGER indicates that severe or life-threatening personal
injury will occur.
WARNING:
WARNING indicates that severe to life-threatening personal
injury may occur.
CAUTION:
CAUTION indicates that minor to medium personal injury may
occur.
NOTICE:
NOTICE indicates that material damage may occur.
Important information
The info symbol indicates important information where there is
no risk to people or property.
1.2 General safety instructions
H Notices for the target group
These operating instructions are
intended for the heating system
operator.
All instructions must be observed.
Failure to comply with instructions may
result in material damage and personal
injury, including danger to life.
▶ Read and retain the operating
instructions (heat source, heating
controller, etc.) prior to operation.
▶ Observe the safety instructions and
warnings.
H Determined use
▶ Use the product only to control
heating systems.
Any other use is considered
inappropriate. We take no responsibility
for damage caused through incorrect use.
H Risk of scalding at the DHW draw-
off points
▶ If DHW temperatures above 60 °C are
set or if thermal disinfection is
activated, a mixer must be installed.
If in doubt, ask your installer.
To Next Page
Loading...
Need help?
General
