Worcester ZWBR 7-28 HE plus

6 720 610 597 GB (01.07)
28
Text Display
y Use the or button to set the day of the
week.
y Press the button to confirm the setting. The
cursor then returns to the top line.
-or-
y Press the button to confirm the setting and
return to the previous menu (Fig. 36 page 27).
-or-
y Do not press any other buttons for 15 minutes.
6.2.1 Deleting a setting
Either overwrite the setting or press the button to
delete it.
y Find the setting to be deleted.
y Press and release the button.
The display shows --:--
6.2.2 Resetting all parameters to their original
settings.
y Press and hold the button for more than 15 sec-
onds.
After about 5 seconds, the following message
appears on the display:
ATTENTION
Delete all parameters
in x seconds
Once the reset has been completed, the following
message is displayed:
Please wait... Initialising
6.3 Menu structure
i
The hours of service can not be reset to 0.
C
C
C
Submenu
Main
menu 1. 2. 3.
Parameters to
change/select
Page
Set
hour/day
Set
hour/day
- - - Hours
- Minutes
- Day of week
29
Holidays - - Days holiday 29
Heating Heating
program
- - - Day
- 1st operating mode
- 1st switching point
...
- 6th switching point
29
Set econ-
omy
temp.
- - 5...30 °C 30
Hot
water
Hot
water
program
- - - Day
- 1st operating mode
- 1st switching point
...
- 6th switching point
30
Hot
water
immedi-
ately
- - Off/On 30
Info - - - - 30
Settings Heating - - Optimum Start Off/
On
31
Service Display
service
param.
- - 31
Further
options
Lan-
guage
-English/
-Français/
-Deutsch
31
-Time correction
-LCD contrast
31
31
Operat-
ing
times
- 31
Fault
history
- 31