17
USER MANUAL FOR WTS TOWERS
Figure 48
Place the reinforcement bars and fix them with
its pins to the frontal legs.
Figure 49
Place the tower in its working position and level
until the bubble level is centered. Wheels should
not get in contact with the ground
Calculate the load to be lifted with the tower. An
example of basic load calculation is attached.
Figure 50
In this example we have obtained a weight of
238,5 kg.
With that load, see what position the load should
have on the forks of the tower. Take into account
that the inclination of the loudspeakers and the
bumper should not lean against any part of the
tower.
Figure 51
Choose the WTS tower model. Check for the
value immediately above the load you need.
With this value, take the exact position to which
the accessory for flying must be placed.
To Next Page
Loading...