EasyManua.ls Logo

WorkPro WTS 905/DY - Figure 60

WorkPro WTS 905/DY
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
USER MANUAL FOR WTS TOWERS
Figure 60
To descend the load: Descend the load with the
hoist until it is just above the ground. The load
should never be descended with the tower
winch.
Figure 61
To descend the tower: Tense the cable and
unlock the first security system. Turn the winch
while keeping the safety system unlocked with
your other hand. If the safety system is not
operated with one hand, the tower will descend
until it is locked.
WARNING! If the tower is attempted
to go down without tension in the
cable and any of the safety systems
are activated, a dangerous situation will occur
because the load will descend very abruptly,
being able to destabilize the whole installation
and incurring in a serious accident.
Once the load is descended, block all sections
and follow steps 4 to 1 (in that order).