Worlde W8808A - Track Clear

REGISTRATION
MEMORY
BANK
REGISTRATION MEMORYREGISTRATION MEMORY
SONG
NUMBER
RECORD
SONG MEMORYSONG MEMORY
METRONOME
ACMP
SPLIT
ACMP
TRACK
CLEAR
4
REGISTRATION
MEMORY
BANK
REGISTRATION MEMORYREGISTRATION MEMORY
SONG
NUMBER
RECORD
SONG MEMORYSONG MEMORY
METRONOME
ACMP
SPLIT
ACMP
TRACK
CLEAR
4
29
The Track Clear operation is to completely erase all the recorded data on a selected track of
a selected User song, leaving the other tracks intact. Use this operation only when you are
sure to clear a track and record a new one. To erase the data of an entire song, use the Song
Clear operation.
Select the desired song.
Press the [SONG NO] button, and then use the numeric keypad or press [+ / Yes] or [- / No]
button to select the desired song (No.1 to No.5).
Press and hold down the button corresponding to the track to be erased.
Press and hold down the appropriate [SONG MEMORY] button [M1]-[M5] [ACMP
TRACK] for at least one second.
Press the [+ / YES] button.
At the Sure? prompt, press the [+ / YES] button, or press the [- / NO] button to abort.
Pressing the [+ / YES] button is to clear the desired track. LCD shows sure?
Again press the [+ / YES] button and in the LCD says, Cleared .
Pressing button [- / NO] is to cancel the operation.
TRACKS CLEARTRACKS CLEAR
ACMP
FREEZE
ACMP
FREEZE