To Next PageTo Next PageWhy does my Worx Nitro Chainsaw fail to operate?
Your Worx Chainsaw might fail to operate due to a low battery charge. Make sure to charge both battery packs. Also, check the chain brake to ensure it is not engaged. Refer to CHAIN BRAKE for details.
Why is my Worx Nitro chain dry?
A dry chain on your Worx Chainsaw can be due to several reasons. First, check if there is oil in the reservoir and refill if needed. Another possible cause is a clogged vent in the oil filler cap; if so, clean the cap. Lastly, the oil passage might be clogged, so clean the oil passage outlet.
What to do if my Worx Chainsaw operates intermittently?
If your Worx Chainsaw operates intermittently, overheating could be the issue. Place the machine in a cool, ventilated place to cool it down. Also, applying too much pressure while cutting can cause intermittent operation; apply relatively less pressure. If these steps don't resolve the issue, there may be a loose connection, defective internal wiring, or a defective on/off switch. Contact a service agent for assistance.
What to do if my Worx Nitro chain/chain bar over-heats?
If your Worx Chainsaw's chain or chain bar is overheating, several factors could be the cause. First, check the oil reservoir and refill it if it's empty. A clogged vent in the oil filler cap can also cause overheating, so clean the cap. Additionally, a clogged oil passage can restrict oil flow, so clean the oil passage outlet. Ensure the chain isn't over-tensioned by adjusting the chain tension. Finally, a dull chain can cause excessive friction, so sharpen or replace the chain.
What to do if my Worx Nitro Chainsaw rips, vibrates, and does not saw properly?
If your Worx Chainsaw is ripping, vibrating, or not sawing properly, start by adjusting the chain tension if it's too loose. A dull chain can also cause these issues, so sharpen or replace it. If the chain is worn out, replace it. Finally, ensure the chain teeth are facing in the correct direction; if not, reassemble the chain in the correct direction.
Guidelines for safe work environment and electrical precautions.
Operator awareness, protective equipment, and proper tool usage.
Instructions for charging, using, and maintaining battery packs.
Guidance on tool servicing and specific safety for chain saw operation.
Identifying kickback causes and operator precautions to prevent it.
Critical safety instructions for handling and using battery packs.
Step-by-step guide for safely felling trees, including notching and back cuts.
Methods for removing branches from a fallen tree safely.
Techniques for cutting logs into lengths, with different support methods.
Explains common safety symbols and warnings for the user.
Information on Li-Ion battery handling and proper disposal of electrical waste.
Detailed specifications for the WG385E and WG385E.9 models.
A numbered list of all parts included with the chainsaw.
List of available accessories for purchase with the chainsaw.
Details on noise emission levels and the need for ear protection.
Information on vibration emission values and potential health effects.
Specifies the proper applications for the chainsaw.
Step-by-step instructions for assembling the chain and guide bar.
Procedure for checking and adjusting chain tension.
Importance of oiling the chain and guide bar for optimal performance.
Instructions for filling the chainsaw's oil reservoir.
How to verify the automatic oiling system is functioning correctly.
Initial checks and precautions before operating the tool.
How to check the remaining battery power indicator.
Steps for charging the Li-ion battery pack before first use.
Instructions for safely removing and installing the battery packs.
Understanding the battery level indicators on the tool.
Procedure for starting and stopping the chainsaw.
Explanation of the chain brake safety mechanism and its function.
Guidance on how to perform cutting operations safely and effectively.
Information on built-in safety features to reduce kickback risk.
Essential safety tips for operating the chainsaw securely.
Precautions when cutting wood that is under tension to prevent spring back.
Instructions for proper cleaning and maintenance to reduce kickback risk.
Guidelines for cleaning, inspecting, and storing the chainsaw.
Steps to clean the inner groove of the guide bar.
Indicators for when guide bar and chain maintenance is needed.
Instructions on when and how to replace the guide bar and chain.
Safety precautions and tips for sharpening the saw chain.
Procedure for lubricating the guide bar sprocket with grease.
Ambient temperature ranges for tool and battery use and storage.
Common issues, possible causes, and remedies for chainsaw operation.
General
