Worx WG303E Original Instructions

Chain saw EN
7
6
TECHNICAL DATA
Type WG303E (3-designation of machinery, representative of Chain Saw)
Voltage 220-240V~50/60Hz
Rated power 2000W
Bar length 400mm
Chain speed 12m/s
Oil tank capacity 200ml
Chain pitch 3/8”
Number of chain links 57
Chain gauge 0.05”
Saw chain type ES:91VG
Bar type ES:160SDEA041
Weight (chain & bar
included)
4.8kg
Protection class
/II
NOISE AND TECHNICAL DATA
A weighted sound pressure L
pA
:93dB(A) K
PA
=3dB(A)
A weighted sound power L
wA
:105dB(A) K
WA
=3dB(A)
Wear ear protection when sound pressure is over
80dB(A)
Typical weighted vibration 5.2m/s
2
K=1.5m/s
2
- That the declared viberation total value has been measured accordance with a standard test
method and may be used for comparing one tool with another;
- That the declared viberation total value may also be used in a preliminary assessment of
exposure.
- That the viberation emission during actual use of the power tool can differ from the decleared
total value depending on the ways in which the tool is used; and of the need to identify safety
measures to protect the operator that are based on an estimation of exposure in the actual
conditions of use (taking accounts of all parts of operating cycle such as the times when the tool
is switched off and when it is running idle in addition to the trigger time.)
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials are cut or drilled.

Worx WG303E Specifications

General

Power source	AC
Chain speed	12 m/s
Product color	Black, Orange
Oil tank capacity	0.2 L
Oil level indicator	Yes

Weight and Dimensions

Weight	4800 g