13
Cordless Lawn Mower WG730E WG730E.X
2. COMPONENT LIST
1. SAFETY LOCK-OUT BUTTON
2. BAIL HANDLE
3. UPPER HANDLE
4. HANDLE KNOB, UPPER
5. BAG HANDLE
6. SAFETY FLAP
7. GRASS COLLECTION BAG
8. HANDLE KNOB, LOWER
9. CARRY HANDLE
10. BATTERY PACK COVER
11. GRASS BAG INDICATOR
12. LOWER HANDLE
13. BATTERY PACK* (SEE FIG. E1)
14. SAFETY KEY (SEE FIG. E1)
15. BLADE BOLT (SEE FIG. M1)
16. BLADE (SEE FIG. M1)
*Not all the accessories illustrated or described
are included in standard delivery.
3. TECHNICAL DATA
Type WG730E WG730E.X (7- designation of
machinery, representative of Cordless Lawn
Mower)
WG730E WG730E.X**
Voltage 20V Max.***
No load speed 3500 /min
Deck diameter 32 cm
Cutting diameter 30 cm
Front wheel diameter 140 mm
Rear wheel diameter
160 mm
Cutting height 30 - 70 mm
Cutting height positions 3
Grass collection capacity
30 L
Battery type Lithium-Ion
Machine Weight
(bare tool) 8.6 kg
** X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models.
*** Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
Category Type Capacity
20V Battery
WA3014 4.0 Ah
WA3570 5.0 Ah
20V Charger WA3880 2.0 A
We recommend that you purchase your accessories
from the same store that sold you the tool. Choose
the type according to the work you intend to
undertake. Refer to the accessory packaging for
further details. Store personnel can assist you and
offer advice.
NOISE DATA
A weighted sound pressure L
pA
= 81.3 dB(A)
K
pA
3.0 dB (A)
A weighted sound power L
wA
= 94.9 dB(A)
K
wA
1.0 dB (A)
Wear ear protection
VIBRATION INFORMATION
Typical weighted vibration a
h
< 2.5 m/s²
Uncertainty K = 1.5 m/s²
WARNING The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the tool
is used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
Using the correct accessory for the tool and ensuring it
is sharp and in good condition.